铅酸蓄电池正确的充电时间解析

铅酸蓄电池正确的充电时间解析

铅酸蓄电池充电时刻对于非专业知道是很难掌握的。铅酸蓄电池，又称铅蓄电池，是蓄电池的一种，电极主要由铅制成，电解液是硫酸溶液的一种蓄电池。通常分为开口型电池及阀控型电池两种。前者需要定时注酸保护，后者为免保护型蓄电池。按电池类型可分为小密、中密及大密。这儿我们所讨论的是密闭式阀控铅酸免保护蓄电池充电时刻

Time for non professional know is difficult to grasp the charging of lead-acid batteries. Lead acid battery, also known as lead acid battery, a battery,electrode is mainly made of lead, the electrolyte is a battery of sulfuric acid solution. Usually divided into open type battery and valve regulated batterytwo. The former requires timing acid injection protection, the latter for themaintenance free battery. According to cell types can be divided into small dense, medium dense and dense. Here we discussed is maintenance freebattery charging time sealed valve regulated lead-acid

充电时刻要视充电器的充电电流和电瓶容量的巨细以及剩下电量而定。首要充电前应首要向电瓶内弥补电瓶弥补液至上下刻度线之间（有些电瓶质量不是极好，标的禁绝，可以弥补液没过极板为准）。惯例充电应以≤电瓶容量1/10的电流充12~14小时左右。急充电应以不高于电瓶容量1/2的电流充2~3小时。充电进程要注意观察电瓶温度，摸着烫手时应暂停充电，等温度降下来 再持续充电。

As the charger charging time charge current and battery capacity and the remaining energy and the size of the. The first charge should be primarybattery in battery to make up for the liquid first under scale line (some batteryquality is not good, the misregister, can make the liquid not plate shall prevail).Practice should be based on the capacity of storage battery charging ≤ 1/10current charge 12~14 hours. Quick charging should be no higher than thebattery capacity of 1/2 current charge 2~3 hours. The charging process to observe the battery temperature, feeling the hot charging temperature should be suspended, and so on down to continue charging.

不一样放电深度电池充电所需的时刻放电深度

Not the same depth of discharge the battery charging time required depth ofdischarge